23 Jul 2025
MTD-05-2024 - Jabiru Distributor Caps - has been upissued to Issue 2 today. This MTD can be found HEREÂ and is also available below.
On 10th July 2024, LAA Engineering published Issue 1 of MTD-05-2024. This was published due to apparent variations in the design of the distributor caps and rotor arms on Jabiru 2200 engines, which meant that, in some cases, there was insufficient clearance between the rotor arm and centre boss of the distributor cap, causing the contact button of the distributor cap to be flattened against its range of travel by the rotor arm, which causes extremely accelerated wear leading to ignition issues and potential engine failures.
Today, Issue 2 of MTD-05-2024 has been issued, superseding Issue 1. Issue 1 of MTD-05-2024 detailed a method for ensuring sufficient clearance between the centre boss of the distributor cap and the rotor arm. This method has now been superseded by Jabiru’s Service Bulletin JSL050.